Jump to content
Sign in to follow this  
agouti

Scope Compatibility

Recommended Posts

So, I've noticed the sks can't use the PSOP scope, and various other issues.

 

Now let me state for the record, I've seen more SKSes with PSOP scopes than I have PU scopes, though I've seen PU scopes, and I had a PU knock-off I was planning on putting on my SKS before I decided to go with a zrak because I just need to have a range finder.

Also, I've seen mosins with various scopes, including the PSOP scope. What is the real issue here, is not the scope being used, but the way in which it is mounted. Thus I would like to see a greater compatibility with scopes and rifles. Now, with the PU scope, it uses the typical mosin/sks/SVD style mount, so I could see this not being used on an AK, which requires a different mount. However, the PSOP comes in two main flavors, being the "V" clamp, and the standard side rail. The AK uses the v clamp, and the SKS/SVD/mosin uses the standard side rail. If you wish to keep the PSOP scope the same on both the AK and SVD (which use two different methods of mounting), then, logically, the SKS should be able to mount it as well, as well as the mosin.

 

All that being said, why doesn't the AR have the ability to use a long range scope, or the SKS?

The SKS shares the same side style mounting mechanism as the mosin, and as no actual method of mounting is shown in game, who's to say you couldn't have rail mounts on an AR?

 

maxresdefault.jpg

 

mosinposp1.jpg

_-_-_-_.png

 

3492841_01_bravo_company_ar_mk12_bcm__64

Edited by agouti

Share this post


Link to post
Share on other sites

If anything the scope compatibility needs to be far more restrictive and not even more open.

 

Basically if the weapon can easily, without modification or any hard to imagine machining then give it the scope.

 

Yes any weapon with rails should take any of the railed scopes, the pu scope should not mount on the sks, the pso scope should mount fine on the ak but zeroing should not work as the elevation adjustments are for 7.62x54r out of a svd.

Share this post


Link to post
Share on other sites

If anything the scope compatibility needs to be far more restrictive and not even more open.

 

Basically if the weapon can easily, without modification or any hard to imagine machining then give it the scope.

 

Yes any weapon with rails should take any of the railed scopes, the pu scope should not mount on the sks, the pso scope should mount fine on the ak but zeroing should not work as the elevation adjustments are for 7.62x54r out of a svd.

 

Why should the PU scope not work on an SKS? The SKS was designed to use the PU scope, and all you need to attach it is a to cut out a little bit of the stock and rivet in a basic side rail. The same procedure is necessary on a mosin.

 

 

Also, there's a bajillion different varities of the PSOP, calibrated for different guns.

 

Check these guys out:

http://kalinkaoptics.com/

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×